Monthly Archives: August 2015

Is Big Game Trophy Hunting Wrong?

A few years ago a friend of mine from Wisconsin, Steve Huber, came for a visit in January. Steve was doing a TV show and we went to Clarks Hill to film a striper fishing show and to South Georgia to film a hog hunt. Both trips were a lot of fun.

Steve told me about going to Africa on Safari to kill some of the animals there and also about a caribou hunt in Canada. He said he was setting up some more trips and asked if I would be interested in going with him as an assistant, and have the opportunity to shoot some of the animals I had only read about.

Other than the fact I hate flying and would have to get on an airplane, I really had no desire to shoot big game like that. I have no desire to kill a lion, for example. Hunting around here for whitetail deer does not require flying, and I love venison. But I would rather be fishing than hunting.

There is a huge uproar about a dentists killing a well-known lion on Safari in Africa. There are all kinds of silly claims on the internet and news about this incident and the usual flaky anti-hunters are using it to push their agenda. Some of the things they say don’t make sense, and some are outright lies.

Although I have no desire to go on a Safari, I would never condemn those that do. I am a bass fishing fanatic and I am sure their desire and enjoyment of hunting is similar to my enjoyment of fishing. Just because I don’t want to do something is no reason for me to condemn those that do.

In Africa, game management is dependent on trophy hunting. The dentist paid $50,000 just for the license to hunt a lion and that money is supposed to go to the country he was in for management of game. He also spend many thousands more when he got there, helping the local economy.

Some folks seem to think this lion he killed was a pet. It was in a sanctuary where hunting is not allowed, but as best I can tell the lion was killed over a mile outside its borders. Some claim the lion was lured outside the sanctuary by baiting so it could be shot. As best I can tell baiting is legal in that country.

Some reports I have seen say the lion was old and not in great health. In lion prides, when the dominate male gets old he is killed by a younger, stronger lion that takes his place. That is nature. Nature is what we consider cruel, but animals don’t have emotions, that is just the way wild animals live and die.

I find it really strange that so many folks and mainstream media get their knickers in a knot about something like this but the murder of five of our military don’t seem to faze them. They go crazy about killing a lion but ignore videos showing folks cutting up babies for their parts.

For all the people condemning the dentists, put your money where your mouth and prejudices are. How much have you donated for wildlife management in Africa? How much are you willing to spend, of your own money not everyone else’s tax money, to support wildlife in Africa? Or anywhere else.

Game animals are better protected if they have a value. If locals can make money off hunters, they will protect the animals. Otherwise why would you want wild lions living near you? Lions will kill and eat people, so throughout history in Africa lions have been killed to protect the folks sharing the same habitat.

In the same vein there is a thing going around on Facebook showing a guy with a big camera taking pictures while some kind of wild feline cuddles with him. The caption says “This is how real men hunt.” Other than the fact pictures don’t taste too good no matter how you cook them, it is silly.

Hunt with a camera if you want. Cuddle with wild animals if you want. But don’t be surprised when, like the silly woman trying to take a selfie in Yellowstone Park with a bison, you get gored. And don’t whine when, like the idiot trying to take a selfie with a rattlesnake, you get bit and it costs you $150,000 in hospital bills.

Some of the pictures do reflect real life and death in nature. Like the one showing a crocodile pulling a water buffalo calf into the water for lunch. And the one showing a pride of lions attacking a baby elephant. Nature is not cruel, it is just the way it works.

I will continue to kill deer and eat them.

Why Does Fishing Need To Be Preserved Biscayne National Park?

Legislation Introduced to Preserve Fishing Access in Biscayne National Park

Editor’s Note: Today, news on legislation designed to preserve fishing access to major portions of Biscayne National Park from the American Sportfishing Association (ASA).
from The Fishing Wire

Washington – On the heels of the recent announcement to close over 10,000 acres of Biscayne National Park to fishing, a coalition of recreational fishing and boating organizations praised the introduction of a bipartisan bill, H.R. 3310, that will help stop this and similar unwarranted fishing closures from occurring. Led by Reps. Ileana Ros-Lehtinen (R-Fla.), Mario Diaz-Balart (R-Fla.), Carlos Curbelo (R-Fla.), and 28 other original sponsors, the “Preserving Public Access to Public Waters Act” requires the National Park Service and Office of National Marine Sanctuaries to have approval from state fish and wildlife agencies before closing state waters to recreational or commercial fishing.

“Probably the most concerning aspect of the Biscayne National Park marine reserve decision is the total disregard for the fisheries management expertise of the Florida Fish and Wildlife Conservation Commission,” said Mike Leonard, Ocean Resource Policy director for the American Sportfishing Association. “The states are responsible for nearly all of our nation’s saltwater fisheries management successes. This legislative safeguard will prevent the federal government from ignoring the fisheries management expertise of the states in these types of situations.”

Throughout the development of the General Management Plan for Biscayne National Park, through which the marine reserve is being implemented, the Florida Fish and Wildlife Conservation Commission has provided detailed recommendations to improve the condition of the fisheries resources in the park. The Commission has continually expressed its position that the proposed marine reserve is overly restrictive to the public; will not be biologically effective; and that less restrictive management tools can rebuild the park’s fisheries resources and conserve habitat.

The recreational fishing and boating community has echoed these concerns, but nevertheless the National Park Service ultimately elected to close nearly 40 percent of the park’s reef tract to fishing.

“The Congressional leaders who are sponsoring this bill are to be commended for this common sense approach to protect saltwater anglers from unwarranted access restrictions,” said Chris Horton, Fisheries Program director for the Congressional Sportsmen’s Foundation. “The Biscayne National Park marine reserve is part of a concerning trend of closing marine areas without scientific basis or an understanding of the critical role anglers play in the economy and in funding conservation.”

“Marine reserves are a tool in the fisheries management toolbox, but too often we see them promoted with questionable-at-best motivations,” said Jeff Miller, chairman of Coastal Conservation Association Florida’s Government Relations Committee. “This bill will ensure that Florida has a say in important fisheries management decisions in Biscayne National Park, including marine reserves, and that similar issues don’t arise in other parts of the state and country.”

On Monday, August 3, the House Committee on Natural Resources and the House Committee on Small Business will hold a joint hearing to explore the potential implications of lost access due to the Biscayne marine reserve. The hearing will begin at 10am EST and is being held at the William F. Dickinson Community Center in Homestead, Florida.

Should You Fish for Bedding Bass?

Fishing For Bedding Bass

Georgia has some of the best bass fishing in the United States. We hold the world record largemouth and you can catch seven of the eight kinds of black bass here. There are many public lakes and rivers where you can go and catch bass all year long.

Each year Georgia bass clubs send in a Creel Census Report that documents club tournaments. Carl Quertermus at the University of West Georgia has been keeping these records since 1978 and they show an amazing consistency in bass catches. There might be a cycle on some lakes over a few years but overall the averages change very little.

Our bass regulations are very liberal with a 12 inch size limit on most waters and a creel limit of ten bass per person most places. Yet our bass fishing holds up year after year. But some bass fishermen call for changes in regulations even though state fisheries biologists study the lakes on a daily basis and recommend regulations based on scientific research.

One of the most controversial things bass fishermen do, and it is happening right now, is catching bass off the beds. Tournament fishermen target big spawning females and some have perfected tactics to catch them. This is the time of year those big females are easiest to catch.

Is catching bass off the bed a problem? At first glance it seems taking a big female off the bed before she can spawn or catching a male guarding bass fry soon after the spawn would cause problems. And it might mean the loss of that bed and those fry that year. But what are the long term effects of bed fishing?

First you must understand nature and reproduction of wild fish. To have a successful life and keep bass populations stable a female bass has to produce only two offspring her whole life. She must produce a young bass to replace her and one to replace the male. Not each year, but only one time in her life.

Even without catching bass off the bed almost no eggs will survive and produce a bass that will live more than one year if the population is stable. Nature does not work that way. If many survived they would overpopulate and starve. So even if you take a female off the bed and she does not produce any young after being caught, she may have produced offspring in years past. And there are always many other bedding females that can take up the slack.

What about the genetics. Many fishermen say it is bad to take a trophy bass off the bed and remove her from the gene pool. Although you may stop her from spawning in the future, her genes, if good, are already in the gene pool from successful spawns in past years. A ten pound bass has spawned many times over her life so her genes should be widespread.

Since almost all bass caught in tournaments are released alive after weigh-in many of the females will complete the spawn even after being caught. It depends on where they are in their egg laying cycle when they are caught. And the male will eat his own offspring after guarding them. It seems at some point his parent feelings run out and he starts feeding on his own fry. So if you catch him just before he starts eating his young more of them survive.

Sight fishing for bedding bass is what is usually condemned, but the same people blasting sight fishermen will often happily drag a Carolina rigged lizard through spawning flats to catch bass. They, too, are catching bass off the beds, they just don’t see them first.

If you don’t like bed fishing for bass, don’t do it. But be aware it has not had any impact on our public waters in all the years we have been tracking bass populations.

What Are Outboard Motor Trim and Tilt and Trim Tabs?

Tips on Understanding Engine Trim/Tilt and Trim Tabs from Yamaha Marine

Systems Designed to Improve Performance, Efficiency and Ride

Tilt and trim on the outboard along with optional trim tabs

Tilt and trim on the outboard along with optional trim tabs

The combination of tilt and trim on the outboard along with optional trim tabs can help boaters operate their boats at a high level of efficiency and economy.

The dynamics of driving an outboard-powered boat are very different than driving a car. With a road vehicle, you’re basically rolling its mass over a flat surface on wheels, but with a boat you’re pushing the mass of a vessel through water. The more a boat’s hull planes—or rises up out of the water—the more it reduces the amount of surface actually in contact with the water. Keeping the boat balanced fore and aft and on an even keel affects how efficiently a boat will run. It’s called “trim,” and a properly trimmed hull has two very beneficial results: reduced fuel consumption and increased speed.

Outboard boats often have two systems designed specifically to control trim: the trim and tilt system that is part of the outboard engine(s), and a pair of electric or hydraulic trim tabs that are mounted at or just forward of the transom and flush with the running surface of the hull. Let’s look at the two systems to get a better understanding of what each does and how they work together.

Controls for trim and tilt and trim tabs

Controls for trim and tilt and trim tabs

Controls on the console control both the engine tilt and trim and the trim tabs.

Most outboard engines over 70 horsepower come with a trim and tilt system that is driven by a hydraulic ram located in the center of the engine mounting bracket. Its function is to raise and lower the engine, and it is controlled by an “up/down” rocker switch built into the shift and throttle control that is located directly under your right thumb for ease of access. For boats with more than one outboard, the switch will operate all the engines simultaneously. In the “tilt” mode, the system raises the engine completely out of the water when not in use. It can also be used to raise the engine when running the boat slowly in very shallow water to prevent propeller damage.

In trim mode, the system works to adjust the angle of the engine to affect the running angle of the boat. As the boat increases speed, the engine angle provides the lift necessary to bring the boat on plane for optimal performance. In the full down position, the engine is in “negative trim,” meaning the angle of the engine shaft and propeller is slightly forward of straight down in relation to the transom. This is the position the engine should be in before throttling up from a dead stop. Negative trim exerts downward force on the hull to reduce bow rise that is common to most planing hulls under initial acceleration. The harder the initial acceleration, the greater the tendency the bow will rise. If you throttle up hard from a dead stop, (a procedure called “hole shot”) some hulls will lift the bow at a severe angle momentarily until the downward force of the engine counters the rise.

 Trimmed out level

Trimmed out level

This vee hull is trimmed out level and running at an efficient attitude.

As the boat picks up speed, the bow will settle in and negative trim will become a hindrance to performance because it will inhibit the hull from getting on plane. Now is the time to raise the engine using the trim switch on the throttle to change the angle from negative to positive trim. To find optimum trim at cruising speeds, raise the engine slowly until you start to feel the hull rise. As it comes on plane, both engine RPM and speed will increase without changing the throttle setting, and the steering will feel lighter. Those are all effects caused by the hull rising on plane, which reduces the amount of bottom in contact with the water. Less hull contact equates to less friction, more speed and less power and fuel to push the boat.

If you’re new to boating or if you’re running a new boat for the first time, you’ll have to familiarize yourself with the proper trim settings, and that takes a little practice time. Go through the motions of running the boat from a stop to where the boat comes on plane (on most planing hulls that can range from 20 to 30 MPH). Raise the engine and watch the trim gauge to note the position where the RPM and speed increase and the vessel gains the greatest performance benefit. If you over trim the engine, you can lose hull efficiency. This can be identified a few different ways. As you increase the throttle setting, RPM will continue to climb without a corresponding increase in speed. When over trimmed the bow might begin to rise and fall rhythmically, which is called porpoising. Extreme over trim can cause the propeller to lose its grip on the water, a situation called cavitation.

When you run the boat at higher and higher speeds, you can typically increase the engine trim angle above the optimal setting for cruising, but there is no specific set trim angle for every hull at every speed. It’s how the boat feels and performs that sets the bar. Trim settings vary from boat to boat and with the amount of horsepower you have strapped to the transom, so every boat is a learning experience. Once you find and get used to the correct balance of speed and trim angle, it will become second nature.

Lots of trim

Lots of trim

Stepped hulls, usually in high performance boats, can handle lots of trim—and they sometimes get airborne in rough seas!

A quick note on stepped hull boats is in order. The stepped hull deep-vee design has become very popular in recent years, and it works a little differently than traditional modified or deep-vee hulls. The steps notched into the bottom of the boat force air under the hull to reduce friction and wetted surface. The power trim system on the outboard engines driving a stepped hull is just as important, if not more so, but the hull’s response to trim is different. These designs have very little bow rise under initial acceleration and as the boat gets up on the steps, the riding angle will be far more level to the surface of the water. Raising the engine angle will have a definite effect, and many stepped hull boats can tolerate a greater degree of positive trim than their non-stepped cousins. You can feel the boat get on the steps and increase speed, but the transition is more subtle. Once you get used to the feel, you’ll find stepped hull performance to be faster and more aggressive.

Trim tabs are your other performance enhancing tools. They consist of a pair of planing surfaces attached to the transom or tucked into pockets in the hull at opposite sides of the transom. Trim tabs are pushed down or retracted with electric or hydraulic rams, also called actuators. Each tab is operated independently from paired switches at the helm. Each switch is marked “Down” on one side and “Up” on the other. Down refers to the effect it will have on that side of the boat. At the risk of being confusing, here’s how they work. When you depress down on the left switch it causes the tab on the opposite or right (starboard) side of the transom to lower. As it does, it exerts a downward force to the port side of the boat. Depress down on the right switch and the tab on the left (port) side of the transom exerts a downward force on the starboard side of the boat.

Trim tabs are used to keep the boat on an even keel while running. For example, if you have more people or weight toward the port side of the boat, it will lean to port while underway. Simply depress the starboard side trim tab switch until the boat levels out. Same procedure if the boat is unbalanced to the starboard side. Maintaining an even keel aids the efficiency and ride quality of the hull in both calm and rough water. A boat running on an uneven keel loses a degree of efficiency, but it can also cause the hull to slam on that side when moving through waves.

Trim tabs can also be used to help adjust the angle the bow strikes waves under various sea conditions. When you have the boat trimmed and on plane, you can add or reduce downward pressure on the bow by adjusting both trim tabs simultaneously. This adjustment can help the boat slice through waves in a head sea more efficiently and with less impact. Keep in mind that adjusting running attitude in this manner is very much a matter of feeling how the boat is performing. Boat speed, engine trim and trim tab settings will be different with varying sea states and severity and it takes experimenting with each to find the “sweet spot” for changing conditions.

Outboard power trim and tilt systems and trim tabs are critically important tools for running your boat more efficiently and safely. Their proper use greatly augments the way the hull is designed to perform in calm water, whether you boat on lakes, rivers, bays or in the open ocean. They are absolutely priceless when running boats in rough water and can help you turn a rough ride into a soft one with just a little practice.

What Are the Best Fishing Trips In Georgia Each Month?

Month by month tips for the best fishing trips in Georgia

JANUARY
Spotted Bass:
Lake Allatoona

What to Expect: Spotted bass are abundant on Lake Allatoona and boat traffic is at a minimum so you can fish for them in comfort. The bigger spots hold deep on steep rocky bluff banks on both arms of the main lake and feed in the cold water. Smaller spots are more active in the same areas in more shallow water.

How To: Fish bluff banks with a jig and pig or jig head worm on light line and move both baits in short hops, staying in contact with the bottom. Mid-day is often the best time to get a bite since the sun warms the rocks and water.

Contacts: Mike Bucca owner of Spot Country Guide Service – mbucca@comcast.net

Options: Largemouth move into spawning areas early on Lake Seminole and you can catch them around bedding areas on Carolina rigged lizards and worms on the flats.

Crappie at Lake Thurmond hold in standing timber on old creek and river channels, holding 11 to 20 feet deep in the tops of them.

FEBUARY
Yellow Perch:
Savannah River

What to Expect: Yellow perch run up the Savannah River in the winter and concentrate below the Thurmond Dam. They feed heavily in the pools and eddies and can be caught on a variety of baits. Fish in the one pound range are common and bigger fish can be caught. The Georgia record is only 2 pounds, 8 ounces so you could probably break it if you want to try.

How To: Fish small jigs and live minnows from a boat or the fishing piers to fill your freezer with these tasty fish, there is no limit. Use light line and tackle to get the best fight possible from these fish known for their taste, not fighting ability.

Contacts: The Herring Hut – 864-333-2000

Options: The warm water discharged by the power plant makes Lake Sinclair one of the best places to catch winter largemouths on crankbaits and spinnerbaits.

The state record spotted bass was caught at Lake Burton in February. Fish the ends of long main lake points under schools of baitfish with a jigging spoon or jig and pig.

MARCH
Crappie:
Lake Oconee

What to Expect: Crappie at Lake Oconee move shallow and feed as they get ready to spawn. Some of the biggest crappie of the year will be caught in early March but the whole month is good for numbers of these tasty fish. They will be fat and full of eggs this time of year.

How To: Troll small jigs and live minnows on the ledges and flats up the Oconee River above the I-20 Bridge. Keep your boat right on the lip of the drop and change speeds and depths you are fishing until you hit the right combination. Using several poles or rods with different colors and at different depths will help you quickly find what they want.

Contacts: Guide Al Bassett – 706-473-7758

Options: Rainbow trout bite good in the 48 miles of the Chattahoochee River below the Lake Lanier Dam and is restricted to artificials only and catch and release this time of year.
Prespawn West Point largemouths move onto secondary points in coves and creeks and will hit crankbaits and spinnerbaits.

APRIL
Bluegill:
Lake Seminole

What to Expect: The full moon on April 9th brings the bluegill into shallow flats to spawn on Lake Seminole. Starting a week before the full moon the fish congregate in huge numbers and make beds side by side that are easy to spot over large areas.

How To: Look for beds on sandy flats and fish crickets, grass shrimp and Mepps #2 spinners around them. Anchor your boat a cast away from the edge of the beds so you won’t spook the fish and you can catch fish after fish.

Fish with ultralight rods and reels spooled with four pound line for a good fight or go with the traditional cane pole. The bluegill don’t care how fancy your tackle but a rod and reel makes it easier to stay back from the beds and catch fish.

Contacts: Wingate’s Lunker Lodge – 229-246-0658

Options: Catch Sheepshead on fiddler crabs and shrimp around pilings and rock jetties in bays on the coast.

Your best chance for a Georgia smallmouth bass is Lake Blue Ridge on small worms, crankbaits and a jig and pig on main lake points.

MAY
Largemouths:
Lake Hartwell

What to Expect: Blueback herring spawn on Hartwell in May, especially around the full moon on the 9th, and largemouth gorge on them. The blueback spawn offers some of the best fishing of the year for big largemouth since they will be actively feeding and the big baitfish make the big largemouth move shallow.

How To: Fish a topwater plug like a Zara Spook or soft jerkbaits like Zoom Flukes over shallow bars and humps on the main lake. Bluebacks like to spawn in “blowthroughs,” places where an island near the bank concentrates the wind blowing through a shallow area. The wind and waves expose gravel for the herring to spawn on and bass are nearby.

Contacts: Lamar’s Fishing Cabin – (706) 376-1478

Options: Catch your own mahi-mahi, also called dolphin fish, off the Georgia coast. Troll squid lures and spoons under birds.

The Ogeechee River is full of redbreast sunfish and they hit small spinners, earthworms and crickets under overhanging brush.

JUNE
Mackerel:
Offshore

What to Expect: Both Spanish and King Mackerel are chasing schools of baitfish off the coast. They are on reefs not far off the beaches so long runs are not necessary. Kings get big and will test your tackle. Spanish Mackerel are not as big but both put up good fights and are great eating. On a good day you will get dozens of hits.

How To: Slow troll live bait or artificials near natural and man-made reefs. Be prepared for screaming runs up to 200 yards if you hook a big King. Watch for birds feeding over schools of fish and get near them before starting to troll your baits.

The state record King is a 75 pound, 12 ounce fish caught near Grays Reef by Joe Bell in 2004.

Contacts: Captain Mark Noble (912) 634-1219

Options: Flathead cats feed heavily in hot weather on the Altamaha River. Fish deep holes with big live bream.

Waters Creek is a trophy trout stream and the big ones are smart and hard to catch. Try to outwit a bragging size trout with a fly rod.

JULY
Spotted Bass:
Lake Lanier

What to Expect: Lake Lanier is crowded with pleasure boaters during the day but night time brings the spotted bass out to feed. Night tournaments are common on the lake and winning stringers usually include a five-pound-plus spot. Some big fish can be caught in the dark at Lanier in the summertime.

How To: Start at dusk with topwater baits over offshore humps and long main lake points. When it gets dark switch to big black spinnerbaits slow rolled along the bottom in 18 to 25 feet of water or a deep running crankbait on humps and points with rocks and brush. Also fish a jig and pig or jig head worm with rattles in the same areas, shaking it in one place to attract the fish.

You can get by with heavier line and tackle in the dark but stick with 10 to 12 pound line for your baits. Fish an area slowly and carefully and return to places were you catch fish since there is probably a school feeding there.

Contact: Guide Ryan Coleman – 770-356-4136

Options: Sea Trout feed on oyster bars in the bays on the coast and you can catch them with live shrimp or jigs.

Put your boat in the Flint River downstream of Albany and fish topwater poppers late in the day for exciting hits from big shoal bass.

AUGUST
Blue Cats:
Chattahoochee River

What to Expect: Big blue cats feed in deeper holes in the river below the Walter George dam. From eating size up to trophy size fish, you can catch a lot of them there now. The current means a hard fight from cats grown fat from the fish killed by the generators at the dam. Fishing is best when there is strong current from power generation.

How To: Anchor at the heads of deeper holes and drift live bream or shad into them. Also use cut shad on heavy line and stout tackle. Tie a rig with a sinker heavy enough to get to the bottom and hold there with a swivel two to three feet above it. Tie the sinker on with lighter line so you can break it off if it gets hung. Put a short dropper line from the swivel to a hook of suitable size for the bait you are using and the size fish you are after.

Use big baits for big cats or smaller baits for eating size fish. Frozen shrimp and small chunks of chicken breast work good for smaller cats. Whole shad and bream are best for trophy size fish.

Contacts: Corps of Engineers for generation schedules – 866-772-9542.

Options: Flounder are in the bays on the coast this time of year and can be caught drifting live minnows, bloodworms or shrimp.

Bluegill bed on the full moon again on August 6 so take some crickets and earthworms to the Big Laser PFA.

SEPTEMER
Red Drum:
Coast

What to Expect: Red Drum, also called redfish and channel bass, migrate out of the bays and rivers in the summer and congregate off the beaches and on reefs in the fall. This is the best time to land a big bull drum surf fishing or fishing wrecks and reefs.

How To: Fish cut mullet or blue crab are the best baits for big drum in heavy surf at the mouths of creeks and rivers or fished on reefs and wrecks. Use heavy tackle to take these strong fish – the state record is 47 pound, 7 ounce fish caught off artificial reef “KC.” You can keep Red Drum between 14 and 23 inches long, only and there is a five fish daily limit.

Contacts: Miss Judy Charter – 912-897-4921

Options: Stripers in the Coosa River seek out deep holes this time of year and can be caught on live bait and jigs.

For a change of pace, fray an eight inch piece of white nylon cord and tie it on a silver spoon. Cast to gar on the surface in backouts up the river at Lake Harding.

OCTOBER
Shoal Bass:
Ocmulgee River

What to Expect: Shoal bass were introduced into the Ocmulgee River by fishermen and took a liking to it. Four and five pound fish are common from the Jackson Lake dam to Macon and bigger fish are caught. This time of year the river is low and the bass are easier to find. Be careful and watch the water levels because generation at Jackson Lake will cause the water to rise rapidly. Shoal bass bite better when there is a strong current when power is being generated.

How To: Fish small crayfish colored crankbaits at the heads of pools and work them by any rocks in the current. Drift a Texas rigged worm on light lead with the current through cuts and into deeper pools. Live bait like small crayfish and rock worms are excellent when drifted with the current under a cork. Fish all baits naturally with the current.

Options: In the fall big walleye move onto main lake points on Lake Raburn and can be caught on live earthworms and minnows.

Rocky Mount PFA offers two lakes to fish for largemouth. Time your trip the first ten days of the month when Heath Lake is open.

NOVEMBER
Largemouths:
Jackson Lake

What to Expect: Cooling water makes Jackson Lake largemouth move to shallow wood cover and feed. It also means less boat traffic, making for a more pleasurable fishing day. Some of the biggest bass of the year are caught at Jackson during the cooler months since they are more likely to be in shallow water and more accessible to anglers.

How To: Fish a jig and pig around blowdowns and brush near the main river and creek channels. Use a brown jig if the water is clear or black and blue if it is stained. Work the bait slowly, hitting ever limb and letting it fall back to the bottom.

Wood cover in short pockets and small coves off the main channels are best since the bass can run into them to feed and still have access to deep water nearby.

Contacts: Guide Barry Stokes – 770-713-8521

Options: The Toccoa River is a good year-round river for rainbows but it gets outstanding in the fall

Lake Weiss is known for its big crappie in the fall. Fish wood cover in deep water in major creeks with jigs and minnows.

DECEMBER
Striped Bass:
Lake Thurmond

What to Expect: Big stripers move shallow in the cold water to feed on blueback herring. Fish weighing forty pounds and more are caught each year at Thurmond. The population of big stripers is good and winter is the best time to catch them.

How To: Use planer boards to take live blueback herring in close to the rocks on main lake points. At the same time freeline live herring behind the boat in deeper water to cover a range of depths.

Contacts: Captain Dave Willard – 803-637-6379

Options: Laargemouth bass feed in the Altamaha River in the winter. Fish a jig and pig or crankbait around main river wood cover.

Look for gulls to point the way to hybrids schooling up on West Pointand cast bucktail jigs to them.

These are just a few of the trips you can take to enjoy Georgia fishing at its best this year.

How To Catch Winter Bass At Lakes Sinclair and Oconee

Oconee and Sinclair In Winter

Along its 170 mile course the Oconee River passes through some beautiful country, from its hilly beginnings north of Athens to the flatlands where is joins the Ocmulgee River near Lumber City. But to bass fishermen none of the river is it prettier than the 45 miles contained in Lake Oconee and Lake Sinclair.

Oconee and Sinclair offer some of the best bass fishing in Georgia, especially in the winter. Although the lakes are back to back with the Oconee dam separating the two, and have many similarities, they are different in many ways. Those differences and similarities are important to the bass fishing on each.

Lake Oconee is the newer of the two and its 19,050 acres of water was dammed in 1979. It has 374 miles of shoreline covered with golf courses, expensive houses and docks. There are areas of huge boulders in parts of the lake and natural rock is common. Shallow sandy coves and clay points are found throughout the lake as are big areas of standing timber.

Lake Sinclair is smaller and older than Oconee, with 14,750 acres of water. It has more long creeks so it has slightly more shoreline with 417 miles. Although work on the dam was started in 1929 the Great Depression and World War II stopped it and it was not completed until 1953. There are many sandy coves and shallow creeks with extensive grassbeds, but no standing timber. Some natural rock is in the lake but you won’t find the big boulders common at Oconee. Like Oconee, it is lined with docks.

Lake Sinclair has always had a 12 inch size limit on bass but at Oconee there is a slot limit from 11 to 14 inches, meaning you can keep bass over or under that length. That was done to try to keep down the population of small bass since Oconee is not a fertile lake, but fishermen seldom keep the smaller bass so the slot limit may not be very effective. Both lakes have a ten bass daily possession limit.

Water clarity is similar on both lakes and ranges from very muddy to slightly stained. The upper Oconee River at Oconee is most likely to be muddy while Little River on Sinclair stays heavily stained year round. The clearest water on Sinclair will usually be in Island and Rocky Creeks near the dam and Richland Creek on Oconee is usually the clearest. Sinclair also has a steam power plant that warms areas of the lake, keeping winter temperatures well above those at Oconee in some sections.

At the Oconee Dam the power generators were specially designed to work as pumps, too. During the day water runs through them from Lake Oconee into Lake Sinclair, producing electricity. At night some of the generators are reversed, pumping water from Sinclair back into Oconee. This pump-back operation creates unusual current patterns on both lakes and affects the bass fishing.

When power is being generated at the Oconee dam current runs downstream through Lake Oconee and Lake Sinclair. But when water is being pumped back the current flows upstream in both lakes. This current positions bass in different ways on structure and cover.

The pump-back operation does keep both lakes at a fairly stable water level. Oconee will drop a foot or two during the day and Sinclair will rise the same amount, then Sinclair will drop a foot or two at night while Oconee rises. But the water does not show the drastic drops found on other Georgia lakes in the winter, with both lakes staying within a couple of feet of full pool most of the time.

According to the Georgia Bass Chapter Federation Creel Census Report, in 2007 Sinclair had 81 tournaments and Oconee 73, the second and third highest totals of any Georgia lake. A lot of tournaments are held on the two lakes because fishing is good on them. On Sinclair 2.91 bass per man hour of tournament fishing were weighed in, the highest in the state. At Oconee it was 1.88, not real high but tournaments have an effective 14 inch size limit that lowers the numbers weighed in.

For tournament winning weights Oconee and Sinclair had identical 9.83 pounds, tied for fourth highest in the state. So bass fishermen catch a lot of bass in tournaments on both lakes. The numbers are good and success rates reflect this, meaning you should catch a good number of bass on either lake this winter.

The Georgia DNR says Sinclair has a lot of small bass in it, no surprise to anyone fishing it, and the good 2006 and 2007 year class bass should dominate this winter. Since over 90 percent of bass caught at Sinclair are usually released the numbers should stay high and the size increase with time.

At Oconee the bass population is stable but the DNR is concerned that the numbers of small bass will hurt the lake. Unless bass fishermen start keeping the small bass under the 11 inch slot limit the quality will suffer. That may be reflected in the fact the average big bass in tournaments at Oconee was only 3.68 pounds, compared to 4.20 pounds at Sinclair.

There are a lot of ways to catch bass on both lakes right now. You can follow the same patterns on each or specialize on patterns that work best on one lake or the other.

Fishing docks is a good winter pattern on both lakes. Find a dock near deep water and flip a jig and pig or curly tail worm to the pilings and brush around it and you should get bit. On both lakes pay attention to the current. Strong currents are not as good in the winter but a slight current moving water under docks helps. The bass will hold behind post and brush, facing into the current waiting on food. Position your boat downstream of the current, no matter which way it is flowing, and flip upstream, working your bait back in a natural action.

Crankbaits also work well around docks in both lakes. A #5 or #7 Shadrap run by dock pilings will draw strikes from winter bass. Natural colors like shad or black and silver are good. Just like with the jig and pig, fish with the current. Run your crankbait at a slow, steady retrieve, going slower in colder water.

On Oconee the docks from Long Shoals Ramp up to the Highway 44 Bridge are good. Stay on main lake areas where the docks are deeper and concentrate on outside posts and brush this time of year. Work your jig and pig or worm slowly in the cold water, dropping it to the bottom and jiggling it in one spot by a post.

At Sinclair the docks in Beaverdam Creek are good since the warm discharge from the steam plant keeps the water warmer. There is almost always some current here, too. The discharge from the steam plant moves water even when there is no current from the dams. Also try the docks from Beaverdam Creek to the dam. If the water is muddy go into Rocky and Island Creeks and flip docks in clearer water.

Riprap is excellent on both lakes in the winter. A spinnerbait slow rolled just over the rocks, ticking them as it eases along, it a good choice. Fish it with the current. Crankbaits are also good. Use different sizes to reach different depths. For five-foot deep rocks cast a #5 Shadrap but go to a #8 Shadrap for rocks down to ten feet. Fish all sizes with the current, reel them down to the desired depths then crank them in slowly.

At Sinclair there is almost always current around the rocks at the Highway 441 Bridges and the one in Beaverdam Creek has the added advantage of warmer water. Also check out the riprap around the steam plant outflow in that creek. The riprap at Crooked Creek can be good and riprap around houses and docks on points on the main lake often holds fish, especially if the sun is warming it.

On Oconee the bridges in Lick Creek area always good as is the Highway 44 Bridge over the river. You can catch fish on the I-20 riprap up the river, too. Many of the houses on the main lake have riprap protecting their shoreline. Riprap in front of a seawall that drops into deep water is best. Current is the key and the bass bite much better when some water is moving across the rocks.

Both Oconee and Sinclair have a lot of long points and humps on the main lake that are good places to jig a spoon in cold water. Bass stack up in deep water and hold there all winter long A shallow point or hump with a good drop on it is an ideal place to find a school of bass. Most are near creek and river channels.

Jigging a spoon works best in clearer water. You can locate schools of baitfish with bass under them with a good depthfinder then get right on top of the school and drop a spoon. Mark them with a buoy to you can stay on them. Drop the spoon down to the bottom, pop it up about two feet and let fall back on a tight line. Vary the height you pop it up and the speed of the pop until you find what the bass want.

In both lakes hard bottoms are best. Sand, clay or rock hold more fish so look for these type bottoms no the humps and points. Sometimes bass want cover like a brush pile, stumps or rocks but usually they will be on slick bottoms this time of year on these points and humps.

On Oconee the humps and points from the dam up to the mouth of Richland Creek are good. You can also find fish on up Richland Creek and up the Oconee River if the water is clear but the best spots in the River will be from Lick Creek downstream and in Richland Creek from Sandy Creek downstream. Look for the bass to be holding in 18 to 22 feet of water most days.

At Sinclair the long points and humps from the mouth of Little River to the dam are good and there are some excellent points in both Rocky and Island Creeks. If the main lake is heavily stained concentrate your efforts in the creeks. Bass tend to hold a little deeper in those areas at Sinclair so look for them 18 to 25 feet deep.

Even on the coldest days some bass will be shallow in both lakes. If the sun is shining it will warm the backs of coves and pockets and bass will feed in them. Find a short cove with a good channel running into it, with shallow flats in the back, and the bass will be there looking for something to eat. Crankbaits and spinnerbaits are good bets to catch them .

On Sinclair look for shallow flat pockets on the west side of the lake around Nancy Creek to the dam. Some grass in them helps. Throw a Rat-L-Trap or #5 Shadrap up very shallow and work it back just fast enough to bump the bottom. Also slow roll a spinnerbait along the bottom. Hard sand or clay bottoms are best.

On Oconee there are good pockets from the mouth of Lick Creek to the dam. A pocket that gets sun most of the day is better and grassbeds helps, although there is not a lot of it on Oconee. Although the grass will be dead baitfish still feed on it and they attract bass. A spinnerbait worked along the bottom is an excellent bait for these bass.

Sinclair has a lot more grass than Oconee and the pattern of fishing grass is better there. Most of the coves and creeks from Crooked Creek to the dam on the Oconee River have some grass beds in them. Fish a spinnerbait around them and let the bass tell you if they are holding in the grass or on the edge. Once you establish this pattern you can find similar places in most coves.

Standing timber can be a place to catch winter bass at Oconee but Sinclair does not have it. The timber that runs for a long way on both sides of the point between the Oconee River and Richland Creek as well as the patches of timber in Double Branches are good. You are more likely to have current on the main lake timber on the point than in the patches in the creek.

There are several ways to fish the timber. Bass sometimes suspend in the branches and you can catch them on a crankbait or spinnerbait fished through them. Make fairly short cast with either bait and get them down to about ten feet deep. Bounce them through the limbs and off the trunks of the trees. Vary the depth until you catch a bass then concentrate on that depth.

Also pay attention to which tree the bass hits. Is it on the outside edge of the patch of timber or on the inside edge. Or is it in the middle of the patch. If on the edges concentrate on them but if inside the timber fish every tree.

You may also be able to tell what kind of tree it is and whether it has underwater branches. An old cedar tree will have more branches than most others. If you are hitting a lot of branches when you catch a bass try to find trees that have a lot of them to fish.

If the fish don’t want a bait moving through the trees, try dropping a jig and pig down the trunk. A light jig and pig with a twin curly tail trailer will fall slowly and draw a bite. Fish it on heavy line and set the hook hard if you see a twitch or jump in your line as your bait falls. If it stops falling before getting to the bottom be ready to set the hook, a bass probably has it.

Don’t pass up jigging a spoon along the creek channels and ditches in the timber, too. Bass will often hold right on the bottom on the lip of the ditch by the tree. The best way to get to them is to drop a spoon down and jig it vertically.

Start at the back of the pockets of timber in Double Branches where the channel enters the trees and work deeper, or work the outside of the trees along the channel in Richland Creek. Any change in the bottom, like two ditches coming together, a big rock or a hump, will help hold bass. When you find the best depth concentrate on it.

Spend some time on Lake Oconee or Sinclair this winter. Even if you are cold, the bass will make it worth your time.